close finisher door. Check canon.usa.com for operators manual. Which finisher do you have internal or external,if you open door on the side of the finisher the instructions should be on the door lable
Question about Office Equipment & Supplies
...a problem finding parts for it, there are a lot of different reasons for the door not being showed closed. Good ...
Question about Sharp Office Equipment & Supplies
screen says close finisher door, where is finisher door? The stapler unit on the exit side, there may be more than one door. -Carl
Question about Toshiba Office Equipment & Supplies
...close the finisher door. What door is that...I seemed to have closed whatever door that I can see. Please check the actuator for the front door switch, it could be bent or out of position. Hope this ...
...Remove blue staple cartridge and remove the staple jam. After you reinstall the cartridge into the staple unit just close the finisher door and the unit will move back to home position on its
...close the fsn door...everything seems to be closed but it still will not work, iHi if the message is to close the finisher door open and where the door locks in use a folded piece of paper long piece ...
Question about Office Equipment & Supplies
Bizhub 282 says to close section show by arrow (points to the finishing unit) but all doors are closed and I already checked if the finisher is sitting correctly. I tried opening and closing all doors
Question about Toshiba Office Equipment & Supplies
Bizhub 282 close section shown by arrow. Copier says to close the section shown by arrow. However all the doors are closed. This is the front of the machine where the finisher is. the finisher would ...
close finisher door" Copier will not copy due to "close finisher door" error. I have checked and all doors etc are closed. Can anyone help me? Finisher door is the sorter. there is a switch or door in
Question about Konica Minolta Office Equipment & Supplies
...Close FNS Conveyance Door" My Konica 7020 is showing the message "Please Close FNS Conveyance Door"... But it is closed. Is there a hard reset or any override I can use to help it recognize it's no ...
367 questions posted
Usually answered in minutes!
401 Questions
218 Questions
181 Questions
164 Questions
139 Questions