Ranger Communications RCI-6900F-25 CB Radio "talkback pa" Questions

...TALKBACK IN A RADIO I HAVE A UNIDEN PRO 510 CB RADIO IT HAS NO PA DOES ANYONE HAVE A CLUE OF HOW TO ADD TALK BACK IN THE RADIO A 200 ohm 1-watt resistor across pins 1 & 4 of the mic jack will make ...

...has installed talkback. Take the top off, check for a resistor between external speaker and pa speaker ports. Remove resistor if it is there and that should remove the talkback. Hope this was

...pa jack and ext speaker jack. You can add a switch if you like to turn it on and off. The lower the resistance, the louder the talkback. buy an external speaker with talkback it is the best way to do ...

...pa/ext spkr. jacks are a convenient place to connect it. You may decide to control talkback by running the circut thru a switch like brite / dim switch . Want less talkback, use more resistance, 150 ...

pc 78 xl+ all wires in,but yellow wire need to know where on the board it goes. new model radio . directions dont match board why,just jump the pa and ext speaker outputs and you have instant talkback

...talkback mode on my coolpad arise ? does it have connectors for external and pa adaptors? If so look to see if there is a resistor across the solder joints. IF THERE IS ,cut if and remove it. Now you ...

...be the easy one. Take the top solder side cover off . look at the external speaker output and the PA out put area . If there is a resistor soldered across the outputs remove it and no more

...how your radio sounds if you want it to work on am you need to attach a 33ohm resistor from the positive to the neg of the external and pa plug ins. the talkback will be on all the time by the

PA (public address) Are you trying to say that the radio has talkback but you can't hear it? And that's a bad thing? All talkback does is increase the likelyhood you're going to squeal when using high