GE Profile WPRE6100G Top Load Washer "water getting hot cold" Questions

...hot water for wash and rinse. If I select ATC cold/cold, I get hot water for wash and rinse, If I select ATC warm/cold, I get hot water for wash and rinse, If I select ATC Hot cold, I get cold water ...

hot water hose to cold inlet and cold water hose to cold inlet, the hot inlet valve opens but the cold valve doesn't open after pressing start. I get the FH error after the wash cycle because there is

Water does not get hot on a hot wash Shut off the water. Disconnect & check the BOTH water supply hoses at the MACHINE to check for obstructions / kinks / etc: Check for and clean any strainer / ...

...hot water to wash I get cold water to wash ,but no hot water Is the hot water hot that is coming to the washer? Are you using the correct settings on the unit? If yes to both then either the solinoid ...

...hot water Cold water fills fine, no hot water. I verified that there is hot water coming from the wall. The water fill valve - The water fill valve is a mechanical and electrical part, the coils on ...

hot 4 water temp settings- cold (I assume all cold water) cool (I assume mostly cold, a little bit of hot water) warm (I would think perhaps half hot, half cold) and hot( which should be ALL hot water

hot water even if i change the rinse tempeature switch to cold/cold. that's odd. if you choose cold/cold then check your hose orientation. you could have put the hot water to the cold solenoid. or the

...hot water and no cold water entering on the machine. The water fill valve - The water fill valve is a mechanical and electrical part, the coils on the valve need electricity to mechanically open the ...

Getting cold water in machine can't get hot water, have hot water through out house Turn off the water and reverse the hot and cold water connections going into the faucet, then turn the water back on

...hot water when the temprature setting is on cold ...and cold water when it is on hot. All rinses are hot. What part could be bad? The water temperature is incorrect The temperature of the incoming ...