...the washer and then pulls out to start the cycle. Problem is when the knob is pulled out the cycle will not start. if knob is held up it will start and then stop. bad contacts in timer ..replace ...
...Start washing on normal setting (10 minute mark) - Fills, agitates, but goes much longer than 10 minutes - knob does move but seem to get stuck around 2 * Advanced dial manually to just after time ...
stop as if someone had pushed the control knob in, but the timer continues and will skip the cycle. this causes the clothes to not drain properly and not rinse. pushing down on the control knob causes
...start it up again is "wiggle" the knob around. After we "wiggle" the knob the cycle continues as normal. It only stops in one spot and the same spot every time. Would this be a quick fix? should be ...
...start/ stop knob of my whirlpool washer LSQ9564JQ0 just spins. I have to deeply press against the larger part of the timer to move the arrow to the wash settings. I will still start and stop though. ...
start again is to jiggle the cycle knob, or, strangely, leaning on top of the washer. We think it might have something to do with a possible burnout on the contacts inside the cycle knob. Jiggling the
...stop but nothing happens except it makes stead sound, loike boooooooooo. can anyone help? does it have a manual programme knob?if it does ,probably the internal contacts do not mesh so it stops at ...
Question about Whirlpool Washing Machines
...stop running (turns off) during a wash cycle? This just started today. After a few minutes, the washing machine stops. I try several random things like resetting the GFCI outlet; joggling the plug; ...
...i stop the machine during washing and want to select another program quick the knob moving but the light fixed on color ??? Press start stop button for 3 seconds, then you can select another
Question about Whirlpool Washing Machines
start-stop knob on a Whilpool Heavy Duty Thin Twin stacked washer dryer On my Whirlpool Thin Twin the water temperature selection knob is broken off. I think to replace it the front control panel must
579 questions posted
Usually answered in minutes!
992 Questions
874 Questions
371 Questions
323 Questions
255 Questions