...link The light power, wan and networks 1 2 3 and 4 always on, i tried a reset in the back but that dont works seems like it gets stuck while its booting the config and stays that way. How are you ...
...link router (DIR-625) works fine when connected via ethernet but the wifi light is not coming on and the device info page says 'init failed' for the wireless radio. any suggestions? If the wifi light ...
...light was on.....i tried connecting it directly to my pc via lan cable but pc cannot identify the ip address...i tried to reset it via reset switch but it does not reset now... and the wifi is not ...
...light stops blinking, the unit is reset. Resetting the router does not reset the firmware to an earlier version. It will change all settings back to factory defaults. If you have the European version ...
Question about TP-LINK Computers & Internet
...reset button and wait for the AP to reboot.Reset the factory defaults.Here is your user manual:http://www.tp-link.com/english/soft/20091515618.pdf Default username and password is admin for ...
...Use a pen or paper clip and press down for 10 seconds. Make sure the lights on the router stop blinking for one second. Release the button and make sure to reset your wireless security and
reset my d-link 655? I tried to reset by pushing a pin into reset but it did not work. I also forgot my security code how do I establish another? Thank You, Morris [email protected] Maybe you push
Question about TP-LINK Computers & Internet
link tl-wr841n system light keeps on flashing, how do I fix it? system light must flashing every second or one second . that is mean the system work correctely . but if the light was flashing rapidly
...light stops blinking, the unit is reset. Resetting the router does not reset the firmware to an earlier version. It will change all settings back to factory defaults. If you have the European version ...
...working. If totally dead, check wires connected OK. Reset with pen tip or opened out paperclip while holding power in. All lights will stay on for 10 seconds then it should reset. If totally dead, ...
289 questions posted
Usually answered in minutes!
1,980 Questions
758 Questions
457 Questions
324 Questions
292 Questions