Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835) "ethernet light keeps flashing" Questions

...ethernet cables and replaced them many times and the problem is still going. If the lights are flashing - that's OK. Wireless light will flash because the connections and beacon transmission, port ...

...Wireless does not work nor router quite working. Wireless does not work nor cable plugged into ethernet port will work. Internet plugged directly into computer works fine. all lights on front ...

...Ethernet light, and then the internet light. It keeps repeating this over and over, what's wrong? I've unplugged the cables and restarted the computer but still it keeps flashing the same lights over ...

ethernet and internet lights keep flashing - system is slow This is quite normal. Are you able to access the internet properly? Check you system for Malware. Got to the site, download the free version

...keeps dropping connectivity to the internet does your router and your landline phone is in one connection in with a splitter..does connection failed whenever there's a call?if so your splitter ...

light and I can hear a relay click every 2 minutes at which time a pop-up say "ethernet line disconnected". I tried new power supply etc. to no avail! It is fried after 1.5 years! No more 2wire for me

Ethernet port labeled "connection to modem." 3 Soft-reset the router by placing a sharp object, like a push pin, into the router hole. Push inward and immediately release the button. The lights on the

...ethernet cable. However, the DSL light doesn't ever get solid green on it.It keeps flashing. I also have a D-Link modem supplied by MTNL and when I connect that, the DSL light is solid green on that. ...

...flashing once and the router rebooting in the default configuration. Connect with an Ethernet cable and reconfigure as usual. If it's a stock Netgear, the username/password is either admin/admin or ...

...light keeps flashing. I'm not sure which one it is as I can't find the manual. Thanks. Connect with an ethernet cable and find out the IP Address, subnet mask, gateway, and dns, by double clicking on ...