Stanton STR8-30 Turntable "rca cable ground replacement" Questions

...You have a bad rca that tends to happen after time ... your gonna have to open up that table and un soder the old rca and replace with a new one. also check your ground ...

...RCA cables, and tried different cartridges, the only other thing that would cause this type of issue is your tonearm. It's probably on it's way out, and will need to be replaced shortly. You can ...

rca ground, Did Table #1, works great, Did table #2 exact same thing, and I get a loud buzzing sound, so I took the cable of again, recut them, and soldered them again, still same problem, could it be

...RCA cable that connects to my mixer which is damaged? i tried to desolder it to change the cable but the small copper plate under the solder came out together with the RCA cable, can I buy a ...

...RCA's. The guy said that i didn't have ground before and that he fixed that. Now I have this problem and i don't want these guys to keep putting their hands on this great record player. Please any ...

rca leads, make sure the ground lead is tethered, make sure the lines arent crossed under the headshell....but soldering a fresh pair of rca, usually fixes that....Also remove the headshell/cartridge,

...just a loose connection? You have a bad rca that tends to happen after time ... your gonna have to open up that table and un soder the old rca and replace with a new one. also check your ground ...

...RCA cables and ground wire or before? If this is happening after the replacement, it is probably faulty cables/connectors or a faulty grounding. If it happened even before the replacement of ...

RCA cables and ground wire. Same thing. Any ideas? Check the internal circuit of the deck, follow the leads from the cartridge. Perhaps a faulty resistor or something else in any pre-amp. Make certain

rca or grounding cable... Hello, I have a weird issue with both my decks. All of a sudden both decks produced a loud hum after I swittched them on. At first I thought it was my mixer (Stanton SMX 501)