Hifonics Brutus BXi 1206D Car Audio Amplifier "bass settings" Questions

...bass boost (10?) and adjust the gain. Honestly, you may have to play around with both settings until you find a happy medium. There is going to be a maximum the amp can provide no matter how you get ...

...settings and make sure everything is flat, bass, mid bass etc. example i had my eq past half but i had my gain at mid way, it was hitting hard, then i tried turning the eq all the way down and the ...

...bass to front speakers as well? Hello michaelandta, Check your filter settings on the front channels. It sounds like they may be set to "high pass" which would eliminate the bass frequencies. If you ...

I plugged int he rca's but he the lowest sounding bass possibe how can i fix this kicker subs arnt ment to hit the lowest bass, unless you go spend a **** load of money, im talking 3000 wat amp, ant ...

bass) lower all the settings as low as possible then turn them up slightly to increase volume to a level where its the hardest and clean sounding..lower volume after this eliminates the bass and keeps

...i changed the radio and all speakers work,but now i have no bass Have you checked to make sure that HI PASS is not turned on. That will filter your bass. Is the settings on your head unit

what settings for Yamaha rxv375 sub bass on set up no bass coming from it at the moment Check to ensure you don't have a high pass filter set on the amp or radio!

...need advice wat settings should i have the: level bass eq bass freq and low pass for a 2000 watt monoblock amp with 2 kicker comp 12's if you use for bass need to adjust to a 120Hz in the amp & ...

setting low pass and bass eq on amp I am powering one 15inch Kicker L7 (2000 watt peak, 1000 watt rms) at 1ohm what low pass HZ setting do i set it to and how do i set the bass eq without damaging ...

Is the bass boost the gain or frequency knob? Bass boost simply adds DB or gain to the bass signal. Some like it, some dont. The frequency knob is the Low Pass Filter (LPF) that cuts off the amp ...