Panasonic SC-PT1050 System "turn speakers" Questions

...turn it back on? If not, good. If it does, find a service center. Re-connect the speakers to the appropriate terminals one speaker at a time, turning off the receiver each time you make a connection. ...

...Turn the receiver back on. If your receiver still says "protect" or turns off, it needs to be serviced. If your receiver stays on; reconnect your speakers one at a time and power back up after each ...

...speakers. Turn the unit back on and turn the volume up to 45 with no speakers connected. If the unit stays on then you will know that one of the speakers was causing this short to happen. If that is ...

...speakers and turn on unit to see if it goes into protect. IF it does then the problem is in the output section of the main amplifier.. Possible bad shorted output transistor or preamp transistors or ...

...speakers from the receiver. Turn the power on, and see if it stays on. If the unit shuts off with all the speakers disconnected, then you most likely have a faulty unit, and it will need to be ...

...speakers to turn on in AV-1 function I am trying to use the AV-1 function on my dvd player/receiver to play TV channels in surround sound. I connected wires into the AV-1 input connection behind the ...

...speakers one by one and turn the power on, if the same error code comes up the problem will be with the amp. However that does not mean it's blown it may just be a fault with the short circuit ...

...Turn the receiver back on. If your receiver still says "protect" or turns off, it needs to be serviced. If your receiver stays on; reconnect your speakers one at a time and power back up after each ...

...Turn the receiver back on. If your receiver still says "protect" or turns off, it needs to be serviced. If your receiver stays on; reconnect your speakers one at a time and power back up after each ...