...Auto Gradation Adjustment. It's on pages 162-163 of the manual found here: http://download.support.xerox.com/pub/docs/DocuColor_3535/userdocs/any-os/en/3535_User_Guide.pdf Here is what it says: Auto ...
...Auto Gradation and you get the message,'Auto Graduation Procedure has completed with an error' make sure that 8.5 x 11 inch (216 mm x 279 mm) paper is loaded into Tray 5 Long Edge Feed (LEF). ...
Question about Xerox Office Equipment & Supplies
...Auto Gradation and you get the message,'Auto Graduation Procedure has completed with an error' make sure that 8.5 x 11 inch (216 mm x 279 mm) paper is loaded into Tray 5 Long Edge Feed (LEF). ...
auto gradation adjust press * with head then go to adjustment/cleaning and follow the instruction or check the optical mirrors for dust contamination if is dirty you can remove 2 screws and remove the
...auto gradation under the additional functions button. just follow the instructions as you run it they are self explantory. though my experience from working on them it is never that simple. there is ...
...auto gradation adjustment.although the chances of it curing this problem are slim. Enter the additional functions mode by pressing the head key, then select 'COMMON SETTINGS' then select ...
Question about Canon Office Equipment & Supplies
...lines dose not go togher makes shadow i already put new drums, cleaning blade and i cleaned the transfer belt adjust auto gradation plz need urgent help Clean the transfer unit and replace the
...now this code is appearing it could be that the ATR sensor is dirty. if you still have the old drum slide it back in to see the code goes away, if the copier comes ready run the full auto
Question about Xerox Office Equipment & Supplies
...auto gradation adjustment, perform that. Here are the steps. To enter the CE mode: Press and hold the 0 key for 5 seconds, then while still holding down the 0 key, press the Start button. The CE ...
...by date, ( worn out". This is signified by the 01=Yellow, B0 = worn out. It is usually when the machine is trying to do an auto gradation and the patch has insufficient density. Replace the
285 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
