Brother IntelliFax-4100e Fax "paper feed" Questions

feed the paper. Since this is a rear feed machine sometimes things can fall into the paper feed slot so I would remove the paper and look into the port where the paper goes. Also while your there look

...paper feed clutch, or the solonoid that releases the feed rollers is bad. Also the paper tray should move up and down when the paper feeds to move the paper against the rollers. Up to feed down to ...

...paper feed clutch and duplex cluch installed. This is noticable when there is a squelching noise when paper feeds. Other times the registration clutch is not working. The feed roll itself can cause ...

...paper feed problem, try taking some rubbing alchoial and clean the ADF paper feed tires, This helps the paper to feed into the scanner unit so the fax can be sent. I have also seen part of the ADF ...

paper feed The fax machine saves the fax to memory, the paper will load the fax then starts printing but the paper is not feeding into the fax Is your paper right in slot with grey flap over top of ...

...Paper feed. You will need to ope the upper face portion by pulling it, and then look for papers/ dirt / pins there, you can either clean it by blowing air or use a blower, or if you can see the ...

feeder Paper only feed halfway then stop. Paper being printed or Sent? but prob Dirty feed roller (paper feed or doc feed roller)

feed roller, paper detect switch stuck or fragments of paper in original feeding paper path area or feeding stuff too thick or stiff, or if multi document issue it is the pad or roller that sits under

feed paper in Hi ! I shall provide you with the online manual. http://www.sharpusa.com/files/fax_man_uxp100.pdf In this page no 12 and 13 tells us how to feed the imaging film in. Page 14 and 15 tells

...feed paper into the Sharp fax UX-108? I can't find the way to feed the paper. There are two places for paper to come out. Which one? I put the roll in the back. Should it be over or under? And...does ...