...oil dosen't drain or it drains really, really slowly, or the oil leaks all over the place (at the beggining of the draining process, not the end, so that eliminates too much oil). is it defective? it ...
...DRAIN THE OIL? IS THERE A PETCOCK LALVE TO DRAIN THE OIL FROM THE OLD FRYER- ANS Z21.27 WE HAVE AT OUR VFW POST? WHAT OUR THE ALTERNATIVES TO EMPTY THE FRYER OF COOKING OIL? HENRY it should be in the ...
...drain oil from fryer Hi, Most fryers have a valve right inside the front door that you can place a bottle under and drain the oil right into it... If not then get a small diameter plastic hose from a ...
...drain if the oil was hot, but it won't be hot if the machine stays OFF. Pouring oil down the drain while it's hot will cool down in your pipes and clump. Just dump out the old (COLD) fat ...
Question about Pitco Frialator Kitchen Appliances - Others
...there is no foreign object jammed on the ball valve. You must first drain the oil. Examine also the gasket for damage, if there is, you have to replace the ball valve. how to replace the drain
Question about Pitco Frialator Kitchen Appliances - Others
...paper.Once you drain the oil, let it circulate on filter pan for about 5 minutes so that the powder will mix with oil before pumping it back to the fry tank. The powder helps to prolong the oil
Question about Frymaster Dean Kitchen Appliances - Others
...fryers? I have three in a mobile unit and want to be able to move the trailer without draining the oil. Hi there!For open fryers, oil will still spill even with cover during transit because open ...
fryer Drain the oil, clean the vat completely of any food residue. Let it dry out completely. Refill with oil and turn heater on. If your screen is plugged, (in the pump housing,) It will not pump oil
...see that the piece that is supposed to shut off the valve is not closing all the way. How do we fix this? drain off oil the clear blockage in valve , try cleaning it with a clean cloth or asoft ...
...drain the oil, the valve is usually connected to the vat with a pipe. It sounds like something is inside the vat or the pipe, so take a piece of tubing, like a copper pipe, 3/8" od should be good, ...
26 questions posted
Usually answered in minutes!
162 Questions
4 Questions
23 Questions
13 Questions