Magnum DeltaForce CB Radio "yaesu" Questions

CANT WIRE SILVER EAGLE POWER MIC TO MY YAESU 101EE I DONT HAVE THE WIRING CODE FOR MY YAESU 101EE TO MAKE MY SILVER EAGLE POWER MIC WORK.ITS A D104 MIC get the right stuff

Yaesu FT-100D transmit problem I have a Yaesu FT-100D. When I transmit on any band, VFO or channel, the radio switches to the HOME1 channel. I've done both resets described in the ops manual and these

i need lcd display for yaesu ft 2500m can you supply one? that would be from Yaesu ONLY item. and they are prob gonna want a receipt to verify ownership so its not stolen. just fyi

receiver frequency range on air band (118-136 Mhz) If is possible modify for receiver only on air band (118-136 Mhz). Thanks. Yaesu ft 2900r frequency modification mars mod This should help you..

ft 2900r yaesu all i see on the screen is B0001 i can't see the frequency ft 2900r yaesu all i see on the screen is B0001 i can't see the frequency Try powering the unit up while holding ...

...off when transmitting I would like to turn the beep off so no one hears beep when transmitting on yaesu ft-2900f/t all the beep is for is so people can tell when you are done transmitting. There ...

YAESU FT 8800 WILL POWER UP AFTER USING CHIRP PROGRAMING WHILE TRYING TO PROGRAM WITH CHIRP PROGRAMMING SOFTWARE, I WENT TO UPLOAD THE NEW FREQ'S I WAS INSTRUCTED TO TO UNIT OFF ,HOOK CABLE UP ,THEN ...

i have a yaesu ft2900 ham radio when i key the mic it turns off then comes back on help what do i do i can't use the radio like this each time u key the mic radio goes off then comes back on help You ...

...See my answer for a similar problem where the radio is stuck in an undocumented test mode: Ft 2900r yaesu all I see on the screen is B0001 can see the frequency You said that the radio seems locked; ...

yaesu ft102 no recieve RF gain all the way up? Switches in the correct position? Pretty complex radio for CB and uses tube finals so there could be a switch used for tuning that has to be off for the ...