Question about Midland Radio Communications
Midland 5001z blows fuses immediately after its turned on. I tried the power cord on Cobra 25 that has the identical plug configuration and its Ok. I don't have the receipt as I got it a Brand new
Question about Radio Communications
Midland 5001z 40 channel cb blows fuses its turned on New, just out of the box but no receipt. Keeps blowing fuses immediately after it is turned on. I tried the power cord after I changed the fuse on
...5001z it quit receiving I can turn the squelch all the way off and I dont get any noise at all not sure if its sending since it dont receive You could have a broken RX wire in the mic cord, or the ...
Question about Magnum Radio Communications
i need to know the wiring diagram for a telex rk56 to a 4 pin on a galaxy 88 radio 1= shield and red 2= white 3= blue 4= black yellow-N/C maybe this will help wiring code RK to Midland 5001z
Question about Midland Radio Communications
...midland 5001z cb ? radio is keying up at 3/4 watts need 11/2 to 2 watts to key up a small amp. amps like the smaller wattage so they can push out more power but some amps like the 3 watt figure so ...
...midland 5001Z 17 inch antenna on the roof of my car, not tuned. Not sure if it does need to be tuned. I can hear people just fine, like wonderfully in fact, but barely anyone is able to hear me. ...
Peak and tune midland 5001z you cannot do it unless you have the proper equipment.
Question about Midland Radio Communications
MIDLAND CB RADIO 5001Z NOT RECEIVING,NOT THE MIC , NOT RECEIVING NOT THE MIC, LIKELY CONPONET INSIDE. The relay may be damaged or severely pitted. The connector may be damaged or it's PC ...
Question about Midland Radio Communications
Which pot is the modulation adjustment in a midland 5001z ? https://www.bing.com/videos/search?q=Which+pot+is+the+modulation+adjustment+in+a+midland+5001z&FORM=HDRSC3
145 questions posted
Usually answered in minutes!
41 Questions
12 Questions
2 Questions