Connex 4600 Base CB Radio "white noise" Questions

...the same problem with the white noise. but yes i hooked it up to the in cab power supply in my volvo big trk. power is fine . again you do have increased white noise. but hay i got a company trk. ...

...white noise that effect even relatively close stations incoming signal. is there any way i can vary or reduce the ferocity of this white noise goto you tube and type in cobra 148 gtl dx and look for ...

...white noise, then turn it up just until it goes away. RF gain is how sensitive your receive is. The higher it is, the more range you have. There really is no need to turn it down ever, unless you are ...

...noise toys" are simple. Red is 13.8 power, but wire it to a switchable power so when ya turn the radio off....its off. Black is ground. White is wired to the audio pin on the mic. jack inside. Then ...

...white noise or anything. When i first turn it on, it will work fine, but after a few minutes it will fade out and no incoming or outgoing signal happens. When the mike is keyed up the strength lights ...

white noise on the receive any help would be appreciated . dx-2517 base sounds like your receive is off frequency. Try tuning it in with the clarifier. If you can tune it in better then you need to ...

Motor noise on radio when motor is running You might want to piggyback the radio hot wire onto the stereo fuse as that one might have a filter. You could also add a choke inline on the power wire or ...

white noise w/the squelch all the way down and w/a tone programed. All I can do is press the PTT and hit scan again. Any advice would be helpful. My email is [email protected] P.S. If anyone knows an

...white noise, try to key up but no TX? the dead key drops altho talkback is loud and clear That will need an oscilloscope to get it back right. we can fix for you. wouldn't cost much if all it is just ...

...noise cancelling mic that has 5 coated wires. black, white, red, yellow, blue, and some bare copper strands. Can you tell me which wires go each of the 4 numbered pins of the plug? Thanks, Bob I ...