Connex 4600 Base CB Radio "swr" Questions

Have a new cobra 29lx. Everthing works fine except for the SWR meter. Can't use the meter to adjust SWR. No matter what I do the meter stays the same. Sent to factory but they said nothing was wro

swr to hi and can t get it down i have 3 different radios and all of the swr readings are not the same. my cobra swr is 3.5 my uniden is 5 and my gallexy is 5 i have a brand new coax and wilson 2000 ...

...shack cb trc-447 After installing the antenna, follow these steps to adjust the standing wave ratio(SWR). 1. Turn on the CB. 2. Set S/RF/SWR/CAL to CAL. 3. Key the Mic and rotate SWR CAL so the meter ...

Self adjusting SWR does not work on 959 Galaxy Any antenna I use the swr is always @ 3 or above. I have tried 3 antennas 2 new coax cables and the swr stays the same the swr on the radio is not what ...

...5/01. Thanks for any help you might have, This radio has a built in SWR meter and I need to know how to tune it or do I still need a seperate meter 1) push the button ...

...the rx/tx light and the ant light turn red whats the problem...i am using a brand new antenna your swr setting are off wack fix your swr After installing the antenna, follow these steps to adjust

my ANT light comes on when ever i push the mic button but my SWR isnt that high The meter will be more accurate and an external meter will be even better. If they show good disregard the ant light it ...

dont know how to use the swr meter on my radio With radio turned on 1. Switch the first switch (S/RF SWR CAL) to CAL setting 2. Key mic up & 3. Turn SWR CAL knob while still keying mic until the ...

I want to know the correct method on how to do a SWR test with the Galaxy 959.I have a 5 foot self adjustable firestik and have mounted it to a 4mm thick aluminum plate 30 cm square and will have it ...

I don't understand how to adjust the SWR or how the built in meter works for my DX949. Here is a basic instruction on how to adjust the SWR. When you adjust the SWR, you are not changing anything on ...