Hoover U5507900 Elite Rewind Bagless Upright Vacuum "replace suction hose floor" Questions

replace this part that is breaking causing no suction from the bottom, only from the wand. Part number.. is what we need and how to buy it. want wont ****, or it wont turn off...here is what we did...

hose has good suction but zero suction at the bottom. Clean filter,no clogs.i know replacing the broken belt will make the brush turn. Will it enable suction also? Clear the blockage and make sure the

...hose has lost suction. Help! Power brush and floor vacuum are fine. The suction in the extension hose is the problem Hello, this is Ava with Think Crucial. There could be a number of reasons why your ...

...hose from where it attaches onto the vacuum cleaner. Put your hand over the suction hole and feel for suction. If no suction remove the brush from the floor tool and check the intake. If you have ...

...replace the hose on the handle, it continues to suction, so does not switch the suction to the floor apparatus. The brush is turning, fyi. Hi Stacy, it's Jack at Dyson. This issue you've described ...

...SUCTION THE WATER BACK OFF THE FLOOR. DO I NEED TO CHANGE A BELT OR SOMETHING TO GET IT TO WORK PROPERLY AGAIN? There are no belts. If it makes the noise with the brush assembly removed the motor ...

...suction from the flexible hose. Dust cup and filters are clean. Do I need to replace the floor brush? Unit was purchased in 2006. Has the floor brush ever worked for you? I thought it was broken at ...

...hose to the suction manifold. Pull the hose stright an look inside to see if the blast gate is open or closed. Use the release pedal to cycle the machine between upright and floor mode and you should ...

...suction hose where it bends down to the floor unit,, lots of times dirt,hair and stuff collects there when the filter was plugged up. remove the floor plate ( like you were going to change the belt ) ...

Replace floor plate. Stand machine upright on floor. 4. Press two plastic clips to release the inspection cover, on bottom right hand side of machine (when standing behind it). Look into the hole: you