Frigidaire Affinity ATF7000E Front Load Washer "washing machine leaves spots" Questions

washing machine is leaving small black spots on clothes. The washing machine is only 2 years old Black spots on clothes from a washing machine can be caused by several issues: Detergent buildup: Clean

...spots usually come from the agitator shaft bearing seal which will, when worn, allow oil from the transmission to seep into the wash. Replace the seal, and maybe the upper bearing if the shaft itself ...

...spots. the machine fills up with water washes drains leaves detergent spots on clothes If you dissolve the detergent in a bucket of water before adding it to the clothes you wont get this

...leaves oil spots on my clothes. How do I fix it? The only place where oil can enter the wash would be if the bearing seals have failed. It's a major repair, and the entire machine has to be taken ...

...help me. If it isn't rust, I suspect cotton can decompose if moist for a long time (in the laundry or machine), causing brown spots. In that case, the spots probably cannot be removed. Or can

...cycle on our GE Prodigy Profile leaves at least one spot on our clothes that then never comes out. What would cause this and what are the spots? It is oil spot coming from the transmission

washing, how to resolve this follow the instructions, 1, use vinegar a bottle and place your machine on the hottest wash cycle and let it run through a full cycle, when finished use a paper towel with

...washing machine has suddenly started leaving, what looks like greesy spots, all over the washing. The spots are that of the little holes around the drum. I have tried doing a high temperature wash on ...

...washing, the problem would be cause by a bearing seal leak. What happens is water leaks pass the seal into the bearings, and the grease leaks back into the wash water. To fix it would require the ...

washing machine is occasionally leaving small dark brown spots on clothes. What are these spots and how do we stop this? They are very difficult to impossible to remove! Find and clean the lint filter