Frigidaire Affinity ATF7000E Front Load Washer "tube update machine" Questions

...Update - Dryer program selected - pump starts and then fan starts but no heat from heaters. Heaters testing ok at 56 ohms with no earth faults. Both Heater thermostats closed ready to operate. Sensor ...

...Update frontloader. Error message blinks E20. What should I do? Error code E20 indicates that water cannot be pumped out of the machine. Possible causes: Sieve filter is blocked. Open the sieve lid, ...

AEG OKO-LAVAMAT 86760 UPDATE 6KG C1 on I blew the 2 pressure tubes-clear Water supply strong Start again-just water from spin cycle out What to do next C1 - means that in prewash cycle no water inlet

machine overflows. This switch senses the water level in the clothes tub. It's usually a diaphragm device with a small, clear tube attached between the switch and the bottom of the washer's outer tub.

...tube and hear air in drum. Does this sound like a control issue? A similar post on here (for error code E05) said that they rest the unit with guidence from Smeg over the phone (but my warrenty has ...

hotpoint Aquarius WF740 Hi my washer originally just kept washing for hours with 1 Min on clock, Then it wont work Error F07 any ideas?? Hello again update on error f05 was a sock blockage in the ...

machine and shuts the fill valve off,but if the switch is faulty then it will not shut the water fill valve off and this will not stop the water from filling and this overfills the water.So most cases

i need a proxy to get to you tube Check this blog I found, the guy posts updated proxies every day http://newdailyproxies.blogspot.com/

...update we have had our machine for 2 years and its recently started to show a fault C3 on the screen and had not drained or rinsed the clothes properly. We have cleaned the filter and it seems to be ...

...update ok  their is a  few things that may explain the reason why this is happening first  there is a rubber  tube that flows down from the softner dispenser  that ...