Question about Zanussi Washing Machines
...cycle door wont open on washing machine at the end of the cycle The door is designed to stay shut at the end of a cycle usually for about 4 minutes, even if you switch the machine off at the mains. ...
Question about Washing Machines
...machine wont drain,rinse,spin,water wont drain out start a cycle but seems not to rinse,spin,drain Could be a failed lid switch. This is a safety switch that shuts the machine off during
Question about Washing Machines
co tinue on with cycle it wont shut off. Ive manuly dsconnected the hoses and tiled them in case theres acess water and nothing. Could possibly be the timer control. The timer dial controls the cycles
...wont shut off. It continues to fill even though its trying to drain. If we shut off the water valve, the washer will continue through it's cycles, but if left open, it will drain and fill, drain and ...
...cycle wont drain even try to manually move control knob to further cycle washer does nothing cleaned ot hose water comes out of back of washer fine when hose off and yuo tilt washer back stumped My ...
wont compleatly drain shuts down before spine cycle Hello If the washer shuts down before spin cycle it indicates that it is unable to drain properly. Please check the drain hose/drain pump filter for
Question about Washing Machines
...cycle,wont start up anymore,does this every 4 or 5 loads Try wash on different cycle(I mean if you wash on heavy cycle try permanent press or light load cycle) does it still stop half way through the ...
...wont shut off the water just keeps running through all the the cycles to shut it off i shut the water to the machine manually I have a Kenmore 24072 and it just flooded my kitchen due to not shutting ...
...wont shut off the water just keeps running through all the the cycles to shut it off i shut the water to the machine manually Check water valve. Solenoid may be stuck. This is where your hoses attach ...
...is part of the auto program of the selected cycle. If this wont come in during the cycle, it is possible that the program controller unit is faulty or has errors. You can shut down machine and ...
1,529 questions posted
Usually answered in minutes!
2,660 Questions
974 Questions
650 Questions
256 Questions
168 Questions