Question about Whirlpool Washing Machines
whirlpool duet has a very small hole in the plastic housing attached to the pump. We found a broken bobby pin in this housing and are trying to determine if this made the hole or if the hole is suppo ...
i have a bosch maxx 1000 (wfl2000au/30) machine will not spin. pupm impeller was jammed by a bobby pin. i removed the bobby pin. when machine is on spin cycle only the pump opperates. does not spin at
...we'd be out big money we don't have right now and instead we gained $.96 - and a whole lot of bobby pins! The advice was great. now all you have to do is find a few london bobbys to give them to ...
I think I have a bobby pin in my washer. It clicks when it agitates. How can I get into the drum to find if there is one? I doubt that it's a bobby pin. The noise more than likely comes from the belt.
...bobby pins, barrets, etc.). With the power off, if you flip the washer up on its left side (looking forward at the washer) and rest it on a wall or something, you can see the pump at the back right ...
Bobby pin is stuck under agitator in a front load machine Removed agitator cover by taking out one screw buy pin is still stuck under paddle. you might have to take it off
...removed the drain pump. Very easy access and very easy to remove the drain pump. There was a half a bobby pin against the impeller and that stopped the turning. Took the bobby pin out and put it all ...
Question about Maytag Washing Machines
...bobby pins out. I'd like to try it myself but i can't figure out how to get the front of the machine off. i can open the top but the front seems to be screwed in several places and i don't even know ...
...turn the agitator by hand. What might that be?? remove the agitator to see if there is a coin or bobby pin wedged
1,529 questions posted
Usually answered in minutes!
2,660 Questions
974 Questions
650 Questions
256 Questions
168 Questions
