...remove them,then just flip the control panel back it has plastic hinges so be careful,then you unplug the lid switch,pop off the 2 gold clips holding the back panel to the housing.then just reach ...
...remove the retaining screws in the back of the control panel. With the screws removed, the control panel will lift from the back first, then off. NOTE: Be careful when lifting the panel, there is a ...
...BACK ON A SEARS KENMORE 110.20712990 First, see the Sears parts site for your washer: ...
...remove the retaining screws in the back of the control panel. With the screws removed, the control panel will lift from the back first, then off. NOTE: Be careful when lifting the panel, there is a ...
...Remove the screws securing the top panel at the back of the machine and lift it off.Console Removal Disconnect the ribbon connector from the left side of the central control unit which is located ...
Remove the screws, pull the console slightly forward and then up. On sone washers, there are no removable endcaps. These washers use a clip under the ends of the console. If you un-plug the washer and
Question about Whirlpool Washing Machines
...yes call sears parts and give them serial# which is located under lid.depending on model,there are 2 screws at the bottom back of the contol panel.remove and lift panel.and you'll see the
Question about Kenmore Washing Machines
...remove the two screws at the top on the back of the control panel. If just clips, simply and carefully roll the control panel over the back. An exploded view of your machine is available at ...
...to remove the cabinet which will let you get to the back panel. ...
...back. there is a little plastic tab on top of the machine under the control panel that needs to be removed to remove the tubes. no video help anywhere for our bizarre model. F.Y.I., the Kenmore ...
63 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
1,373 Questions