General Electric Microwave Oven "diode" Questions

while testing microwave diode with 9.2 v got reading of 4.2v is this cause of concern? hat make model. diode tst is usually con with ohm meter and diode isolated. diodes have a c to a voltage and an a

Neff combi blown diode. Found blown 10a fuse blown on display pcb.Replaced fuse but found blown diode on mircowave power supply.Dose this mean the microwave unit is blown or is it worth replacing the ...

...nothing else on the circuit.Is it shot its only 4 years old this could be caused by a shorted diode or bad transformer in the unit itself, diodes are generally inexpensive repairs and are

...Model MC0165UB, without any food inside and now it won't heat. What is the likely problem? The diode converts the A/C power output of the transformer to D/C, doubling the voltage to nearly 5,000 ...

Do I check WB27X1160 hi-voltage diode as I would a standard diode? Do I check this hi-votage diode as I would a standard diode by reversing ohmmeter leads? It appears to be open. Using a digital meter

HV diode producing resistance of 10 ohms. Just tested the diode, transformer, capacitor, and magnitron in my GE jvm1441bh. Everything checks out but the diode. The gallawa website says to set the ...

...mod. #JVM1851BH06. i ohmed the capicitor 2 meg ohm and increased to 11 meg ohm. I also measured the diode which i believe branches off one leg of capacitor it shows open resistance O.L. both ...

How to test a diode I want to see if the diode is good for my GE SPACEMAKER XL1800 is good. To test a diode, first remove it, then use a test meter with a diode check facility. Test component first ...