Living Air XL 15, no ozone Trying to help a friend. Unit was not emitting ozone, and fan was very sluggish. Replaced fan and cleaned lint filter. It now runs properly. Ozone plate didn't look dirty ...
Question about Alpine Air Air Purifiers
...ozone plates required for it to run. I have properly placed the new plates except the center plate....all plates touch the prongs except center plate has no metal prongs.The Unit runs but no ozone ...
Question about Alpine Air Air Purifiers
...ozone plates (made of glass) and doesn't produce ozone when one of the plates is removed. I'm guessing that the lines may tell you when you're engaging both plates to work, i.e. more ozone being ...
Question about Eagle Advantage Air Purifiers
...ozone plates, defeat the safety interlock, turn the unit on, and place a screw driver (holding the plastic handle) one one of the ozone bars, and try to make an arc between the screwdriver and the ...
I have the same thing so ordered new ozone plate, I had my unit for 5 years and never replaced the ozone plate. Try that as I just ordered one from Ebay. try soaking the plate for a few minutes in ...
No ozone smell Everything seems to work well with my Breeze but no ozone smell. This generally indicates that the plate is cracked or not making proper contact. Pull the plate and look very closely as
individual indicator lights. The 'red' light is the ionizer indicator, and the 'green' light is the ozone level indicator. Both lights should be illuminated, if the unit is operating properly. The red
...plate in ammonia that is the smell that produce the ozone plates, that is normal,in all the devices purifiers that works with ozone plates, do not worry about that , that is crispy pure air. a
...ozone. The plates and fans are both good. Thanks Mine has a switch lower right hand side that will stop the ozone. HI,I HAVE A LIVING AIR XL-15 S,SERVICE REQUIRED LIGHT IS ON,UNIT IS CLEAN ,BUT NO ...
...ozone 1) Set the switch to manual rather than auto and always run it on manual. 2) Remove the back of the machine and remove the 4" white plates. Check them for cracks, breaks in the mesh, loose ...
110 questions posted
Usually answered in minutes!
271 Questions
141 Questions
97 Questions
37 Questions
7 Questions