Stanton T.60 Turntable "turntables pitch control" Questions

...pitch control... My other turntable's speed increases and keeps the pitch in tact..but the other one's tones is much from the other when they are set to a higher pitch. I tried adjusting the pitch ...

t be slowed down The pitch control need to be cleaned. You will have the remove the bottom to do this. It will require servicing. It could also be PCB board that that controls the pitch or a bad motor

Pitch Control Problems I have 2 technics 1200 mkII. When I set them both to 0 pitch, they're fine.. but when I set them both to lets say 2+ 4+ 6+ etc. they will both be on the same tempo, but one ...

Pitch Control Dear Experts, I have been using m-audio torq which shows the exact pitch change i am having on my turntable. My pitch control on the turntable keeps changing by +/-1% and at -1% the ...

Pitch control Center is Wrong When the pitch control slider is "clicked" into the center position, the display indicates that is is +0.45%. Can this be reset to 0.00 when in the center position? Gary ...

...you tried adjusting it via the pitch control or even getting another belt for that turntable.... PITCH CORRECTION HAS VERY LITTLE EFFECT. THE BELT SHOULD BE FINE , IT'S A BRAND NEW ...

...turntables numark tt-x1 with one of them the pitch control doesn't work anymore.can you help me?thx allready Either the pitch control is damaged, or your drive system is damaged. Unfortunately for ...

Pitch Control issues on Technics 1200 mk2 If I have both of my technic 1200s at 0 pitch control they're fine, but when i start to increase the pitch controls on them, one turntable seems to lose it's ...

...pitch control (all but very slightly) all the time. My turntables were put on a calibration unit when being serviced and the serviceman found no problems with the pitch on either deck but upon return ...

...pitch control this is a self diagnosis but i think i have either a pitch or drive problem on my techniks sl-1210mk2 if the pitch control is on 0 then the turntable appears fine but when i either move ...