Bush LCD 2 will not switch on at all. Bush LCD 2 will not switch on at all, no light at all. If the TV has no power at all, not even the led light on, and does not respond to remote or button, then ...
bush lcd tv..no power The power supply has the problem
Question about Bush Televison & Video
Bush IDLCD26TV16HD 26" Wide Screen LCD TV. the left side turns red causing a programme on that side to also be slightly distorted. Any help would be greatly appreciated as although the TV is over
BUSH 32'' LCD AT FAULT Flashing Standby LED No StartUp. Most of the time, this is from a failed power supply board, and or a short on one of the other boards. Without board swapping this is a ...
bush 32" LCD TV - the green "power on" LED light is on, however the TV doesn't power up or have any sound or picture. Can you please help? Many thanks Check all electrolitic capacitors at power supply
bush 26 lcd tv standby light flashing If the TV goes off completely, then is usually a faulty power board. If the TV goes in standby, then it is in protection mode. Ensure also that the fault is not ...
...bush lcd 27 inch tv is stuch on flashing red can some one help thanks If the TV goes in standby, then it is in protection mode. Ensure also that the fault is not coming from a faulty receiver box ...
...bush tv is stuck on standby...I push the programme button but nothing happens If the TV goes off completely, then is usually a faulty power board. If the TV goes in standby, then it is in protection ...
...BUSH TV just does not switch on anymore. When I listen carefully, I can hear a continuous clicking sound in the right hand mic. This may or maynot be of any significance, just thought I'd mention it. ...
LCD TV NO DISPLAY OR LOST DISPLAY PICTURES no picture no sound but still light at back of tv been told may of been caused because tv left on constant standby and chip burns out tv they have power but ...
38 questions posted
Usually answered in minutes!
2,410 Questions
1,124 Questions
809 Questions
789 Questions
510 Questions