IBM Wheelwriter 30 Typewriter "carriage lever return" Questions

...lever under the carriage on the left,used for locking the carriage when in transit.Move the lever in the opposite direction,if that does not work press the Capital Lock Key then try it.If this does ...

...carriage return release lever on the far right of the typewriter, that engages a notch on the underside of the roller/carriage return--push it forward to release the lever and you are in business--it ...

...carriage ends up on the left. The return lever has to be on the left side to be able to pull the carriage back to the right to start another line. If it was on the right, it would have to be slid a ...

...thanks. The tab button may be stuck or the carriage release lever is stuck or a broken escapement. On the right hand side of the roller, there are two levers you can pull forward. That should fix

carriage lever return Carriage lever appears to be loose. When dragged across (left) it rubs on the top of the typewriter case and appears to be stuck. Is there away to tighten it or adjust it? if the

...carriage by holding the carrier in place and using your other hand to press Tab Set, but the alignment may be just far enough off to keep you from actually setting the tab. One other thing that ...

how to unlock a smith corona 110 locked carriage Carriage is stuck in right position will not return to left position Pull the hooked lever to the left.

...carriage all the way to the right margin and won't go back to the left margin to begin typing a new line unless I press and hold down the exp key or the backspace key. How do I fix this so it will ...

lever which you need to push back. It is the carriage lock used to hold the carriage in place when it's being transported in the case. Does the carrier move all the way to the left by hand when turned