a rag, wiping it clean. also, using a q-tip soaked with wd-40, clean out inside the brass bearings. once they dry, put it all back together. do not get wd-40 or oil on the motor barrel or the windings
Question about Kodak Office Equipment & Supplies
...put it back together then the fan wouldnt move. when i tuurn on the actual light it starts smokiing a little. the cords are all connected. Chances are there is either something binding the motor or ...
...put it back together. but you must remove the front from the top case, put the top on first, plug the speaker and left harness in, then put the back and front on. wasn't that fun? the problem is not ...
Question about Kodak Office Equipment & Supplies
...back together far enough to test it. Now it has the unusual symptom of cycling forward regardless of which button I press, forward or reverse. I suspect that something got tweaked when I was pulling ...
put on your safety glasses & plug the projector into the wall. At the center of the projector you should see a hub rotating about every second or so. Above it you should see a "J"-shaped wire. See
...put the shell cover back on. If you cover it hough, you can't see what's happening. In any case, run it, advance the slides via the remote preferably, a few times and unplug it.Hopefully it's stopped ...
10 questions posted
Usually answered in minutes!
400 Questions
218 Questions
72 Questions
80 Questions
76 Questions