...we use the shift key the @ sign does not show - we get " (quotation marks) instead Either you have a special printwheel or the spoke on the printwheel is broken or bent try a new printwheel. ...
Question about Brother Office Equipment & Supplies
...new printwheel for my GX6750 typewriter? You can buy one here: http://www.provantage.com/GX6750-Ink-Toner.htm or here: ...
...carefully turning the printwheel by hand. also look for any bent petals on the printwheel. if none of this works, you will need a repair shop or a new machine. Escribe las letras y numeros ...
...online. We have available a good used Prestiege Elite #1353502 IBM printwheel for 29.95 or a new one for 49.95. DickyO Cleveland Business Machines 2419 St. Clair Ave. Cleveland, Ohio 44114 ...
Question about IBM Office Equipment & Supplies
"?" How do i fix this First, try a different printwheel. If that doesn't work, try blowing out the carrier as the sensor that reads the printwheel may be dirty. You may also need a new selection motor
Question about Brother Office Equipment & Supplies
new printwheel and the same thing is happening. Hi - there a many reasons why this happens. Try these first. Replace the ribbon. This might have become tight (faulty) and make this happen. Nasty fault
...printwheel for IBM Wheelwriter 6 re-order #1353502 Prestige Elite? I can get you a new one for $55.00 or I have a good used one for $30.00 plus postage My e-mail is [email protected] I own The ...
...It is like the top of the "n" is not there. How do you fix a broken character? LN take the printwheel out and look at the "n". if the top is indeed broken off, you will need to buy a new ...
...printwheel. DickyO Check first your new print wheel if there is no bend and all letters spokes are aligned. In case there is no bend in the printwheel the problem is in the hammer the pushing the ...
Question about Olympia Office Equipment & Supplies
...hyphen? The P/W is probably worn. Get a new printwheel or you can try moving the impression control to a lower setting. If the paper gets a bulge in it and pick up the top of the printwheel. ...
218 questions posted
Usually answered in minutes!
14 Questions
12 Questions
5 Questions
14 Questions