...see them. I've tried unplugging the copying machine, taking everything out and cleaning it with the air cleaner, reviewing my copy reference, but nothing is working. Any ideas???? Check the
Question about Office Equipment & Supplies
...air-dry-clean (using vacuum cleaner) the housing where the toner is inserted please do so. But it is advantageous to locate the toner sensor location for efficient cleaning. I may know the brand and ...
Question about Office Equipment & Supplies
...i clean the imaging screen. maybe the toner has fallen while loading. thanks clean small amouts of toner with a vacuum and canned air, ( small bursts), if on mirrors further service will be
Question about Ricoh Office Equipment & Supplies
...sits and used a can of air to blow out the inside. now what? Clean the waste toner collection bootle,under transfer belt,clean the toner bootle house and align the drum cleaning blade or chnage
...air. Wipe down and clean every part you can. Replace the toner cartridge. Then run a couple dozen copies of something to pick up the remaining toner from the internal mechanisms. See if their is any ...
...toner out, I used air compressor to clean every bit of toner out from inside. Then I wiped the whole area around the "bump" where the sensor "sees" if the tank is empty. Even a slight film over the ...
...canned air to clean interior (do it outdoors) 3 - spray toner cartridges to remove stray toner (keep them connected to the drums, do not separate) 4 - make sure toner carts are properly installed and ...
Question about Canon Office Equipment & Supplies
...Canned air just makes the problem worse. When changing the drum unit did you change the drum blade ? Try running 50 blank pages to see if it clears up. Good luck. First off, never clean out a laser ...
Question about Sharp Office Equipment & Supplies
...air, take the printer outside and wear rubber globes and breath protection, toner is very small dust particles need to be carefully, NOTE: do not clean with regular vacuum, this filters do not hold ...
of air and blow out all around your toner and drum area. Then used it inside the printer to clean out the toner inside of the machine. If this doesnt work take out all 4 anc clean everything very well
15 questions posted
Usually answered in minutes!
1,105 Questions
603 Questions
557 Questions
331 Questions
354 Questions