Question about Kyocera Office Equipment & Supplies
...screen asks to load paper. The feeder on this model has 1 weak mounting place for the gears that drive the feed roller. The plastic stud that holds the gear will break off of the frame and cause the ...
...screen then I would just buy a replacement printer online. If you remove the outer plastic pieces you should be able to see when the gear does not seat properly. Michael Perfect Printer Parts ...
Question about Sharp Office Equipment & Supplies
...screen appear Error Code # L4-02 L4-02 is a drum motor lock detection. One cause that we have found on these particular models is the waste toner auger (built in the drum unit) drive gear breaks due ...
...screen section 6 rear riso rz 390 ui Check if there is dust or if the output is holding paper sheets to pass. It may be that some of the gear output paper is loosely screw on the shaft causing the ...
Question about Konica Minolta Office Equipment & Supplies
...screen, no paper jams, just the grinding noise and a small earthquake each time we press copy We are not for profit with small budget for repairs any help appreciated Thanks This won't be solved ...
...screen indicator in the printer display a message "12 open or no EP".What does this mean? My computer is an HP Vectra with an MS Windows XP Professional version 2002 Service Pack 2 operating system. ...
screen. Once I turn the printer on, then I can hear loud noise like the cartridge stuck inside the gear. I tried to move the cartridge, but it is not moveable. How could I fix it? Thanks. Hello Dear,
Question about Sharp Office Equipment & Supplies
...cause further issues - especially copy quality. It could be that the belt is not moving at the correct speed due to maybe 1)worn/broken drive gears 2)drag caused by the cleaning blade. Or there could ...
...gear in the developer with 21 teeths. It has worn-out in a month time. Do you think there is a problem that causes it to worn-out easily. We clean the parts where the corona wire is placed which is ...
...screen and corona wire near the drum because it darkens. Do you think there is a problem in these parts. The small gear (21 teeth) easily worn-out. I have just replaced it last june and it has been ...
274 questions posted
Usually answered in minutes!
192 Questions
168 Questions
156 Questions
143 Questions
118 Questions
