Canon FAX-JX200 "faxing voip line" Questions

Ad

Question about Sharp Office Equipment & Supplies

1 Answer

...VOIP phone line. Is it possible to reduce the baud rate on this machine to better accomodate VOIP? It won't make any difference if you could. All fax machines are analog devices and won't work ...

Ad

Question about Office Equipment & Supplies

2 Answers

...voip line error code 388 Can't get my machine to send over voip line, recieves without issue but gets an error code when I send.. Thanks Fax machines are ANALOG devices, VOIP, Vonage etc are DIGITAL ...

Ad

Question about HP Office Equipment & Supplies

1 Answer

slow down a HP 640fax machine for VOIP use how can I slow down my HP 640fax machine for use over a VOIP Can't be done. ALL fax machines are ANALOG devices and will not work reliably on DIGITAL phone ...

Question about Panasonic Office Equipment & Supplies

1 Answer

...line to a VOIP line, dials out fine (dial 9 first), connects as it should w/o problems, starts sending fax and dies after 2-3 pages. It receives fine so far but I've only received 2-3 page faxes, ...

Question about Brother Office Equipment & Supplies

2 Answers

dropping the tx and rx speed to to 4800 bps might help. Successful transmissions depends on your bandwidth of your internet service. VOIP faxing suffers from latency, distortion and packet loss errors

Question about Brother Office Equipment & Supplies

1 Answer

...line, review the information listed below. If you are not using VoIP continue to Step 8.Voice Over Internet Protocol (VoIP) is not a marketed feature of your Brother machine, however there is a ...

Question about HP Office Equipment & Supplies

1 Answer

voip service. There is a modification that you can perform that usually allows you to avoid this problem, you must lower all transmission and reception speeds of the fax modem; this allows the data to

Question about Brother Office Equipment & Supplies

3 Answers

faxing over my voip line Brother MFC4800 will dail out the get the response the gets static and fails to send. Or it connects with the other fax but transmission fails due to poor line condition. What

Question about Canon Office Equipment & Supplies

1 Answer

does not recieve I have a fax jx200 the machne that sends fax messages but does not recieve. Does the fax need some special configuration when working with voip line? Try to "slow" down the fax "speed

Question about HEWLETT-PACKARD Office Equipment & Supplies

2 Answers

...line is not VOIP. Compressed or filtered with a dsl filter. Make sure your fax is connected to the wall from the line side and not the ext or phone side of the fax machine. You may have a noisy line. ...

Not finding what you are looking for?
Canon FAX-JX200 Logo

313 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2426 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...