Canon FAX-JX200 "correct setting send receive faxes" Questions

...receive faxes. Able to send and cartridge printing OK Unable to receive faxes. Able to send There can be a few things wrong lets take it step by step 1)Receive mode,your receive mode must be set ...

...send faxes successfully, have the telephone service provider check the phone line quality. For an HP Fax, turning off ECM from the control panel does not necessarily mean that fax transmission will ...

...Everything is pluged wright. What the problem might be?? Sounds like it could be the settings not correct. (the phone number, it could be set to send only, etc.) I would check the

...correct socket of fax? (Line not Ext.) Is Fax set to auto answer or manual? If you pick up line or press speaker button can you hear other fax sending if so press start and hang up you should receive ...

...send a fax. What are the steps to reset it? I do not have the correct manual to seek out the steps to re-set this machine. It was working a few days ago but I must have done something with the ...

...send faxes but not receive ad my mode is set to fax only, can anyone help ?? Call your fax machine from a regular phone to see if it rings / answers. Try to call it from your phone to see if it's ...

...correct and there can not be much decibel loss over the line. You are making a signal connection, all those conditions must be right to receive a fax. Think of it like a TV remote with batteries that ...

...setting. Please advise. thanks Mary crumplar if the fax is connected to the same line and you have a phone connected to the fax you need to make sure you connect the line from the socket at wall to ...

...send faxes, and receive the confirmation. I have checked the mode button and it is set to fax. The lines all apear to be in the correct spots, and have not been moved recently. Any helpm would be ...

...setting and send a test fax to a helpful person. Slowly increase the baud rate (communication data speed) and send the fax test. When the fax doesn't show up on the receive site, then step one baud ...