...on. next start at channel one and slowly turn the squelch clockwise until the pin moves or you hear static. then surf the channels adjusting the squelch to to that static point until you find your ...
Question about Radio Communications
The only way I can receive is to have static all the time, how can I receive and transmit without static has to do with the electrons in the air waves . Have you noticed that when you are near ...
static I have recently set up a home base Sirio Antenna, but all I can hear is static noise on the rig. SWR and coax both fine. The rig works fine in my car and truck Hi, CB radios use a frequency ...
Static When my radio is on I get a surge in static that swings my gauge to 3. This happens consistently every 20 seconds or so. I can be talking to someone and if they dont swing past 3 the static ...
static I am getting alot of static. how can i illiminate it?? Move to another location.
How do you get static out of a police scanner There should be a squelch control turn it clockwise just until the static stops.
radio will not pick up just static. my dx 88hl radio will not pick up - it just has static. turn up the rf gain all the way. Make sure the coax is connected and good. Make sure the SWR is lower then 1
midland 75-785 static problem all the radio is getting is static. On every channel. Static. Nothing else! bad ground
Question about Galaxy Radios Radio Communications
how too reduce the static noise in a 93T galaxy radio how too reduce the static noise in a 93T galaxy cb radio doesn't make a difference what radio,if you have static it will be in them all . Buy ...
Question about Uniden Radio Communications
The rx icon is always showing and i have constant static. How do i get rid of the static? It will go away if the rx mode is on a number but then i cant communicate with my old 2 way. when it is in the
35 questions posted
Usually answered in minutes!
227 Questions
212 Questions
153 Questions
103 Questions
104 Questions