Radio Shack TRC-447 CB Radio "mic wiring 6 pin" Questions

wiring for 6 pin oricom mic plug i have a oricom mic and a couple of wires have broken off there are 6 pins no1 is at 1oclock going round clock wise no6 is in the middle, the bare wire is on no5 could

mic wiring diagram need a mic wiring diagram for a magnum deltaforce radio Same as Omega #1 Mic Audio #2 Receive #3 Transmit #4 Up/Down for channels #5 Ground/Shield #6 13 volt I NEED PLUG WIRING ...

...wiring to connect a Turner Plus 3 microphone? pin 1 ground pin 2 audio pin 3 TX pin 4 not used on other mics or has 8v on TX for powered mics pin 5 not used on other mics pin 6 not used on other ...

...it just trying to wire it up correctly did you cut the wire to the mic plug . 99% of R.S. mics are wired the same. there are some four pin and 6 pins but basically all the din type plugs are the

wiring a mic i have a 6 pin old delta force mic which wont work on the omega s45 magnumthe colour and pins they are on are- 1-white 2-black 3-red 4-blue 5-ground 6-brown would you know the correct ...

...operation of the radio. Also, you have to make sure the mic is wired for the radio you have. You may find a 6 pin mic, but you might have to rewire it. I have a 6 pin mic, but its not going any

...five wires and cd has 4 pins cb is a cobra 29 ltd I suggest buying a 5 pin to 4 pin adapter. Ebay has them for $6. I would go chopping wires on the mic. Cobra 29 ltd is a nice radio. Have one

...mic wiring diagram. everyone has posted on others asking the same and giving the pin wiring, but I cannot find the inside switch wiring. I was trying to figure out how to wire the mic to my magnum ...

...mic with a 5 pin conector instead of a 6 pin conecter by mistake .can I use this mic on this radoo .do you know what cooe wires form tje mic go to what pin numbet I know I wont be able to change the ...

...wiring for the mic Hello, Here is the wire diagram for several common mics in relation to a 4 pin CB. Most recent 4 pin CB's such as Midland, Cobra, Connex, Uniden, etc can use 4 pin mics. The wiring ...