Soundstorm Force F2800 Car Audio Amplifier "protection light amp" Questions

protection light came on what cut off Amp in Protection - Troubleshooting - Basic Car Audio ... www.bcae1.com/.../troubleshootingbasicsampinprotect.htm Some simply shut down and the power light will ...

...protection LED remains lit without remote voltage applied, the amp may have other problems. Does the protection LED light with no speaker wires connected to the amp and no RCAs plugged into the

...amp seems to run , all the gauges light up but no power goes to my subs, on the back there are 2 lites that light up- one red and says protect and another that says power and is green. the protect ...

...protection light, try the following: Unhook all input RCA cables on the amp. See if that helps with protection light. With a DMM, measure the voltage going into the amp's power connectors. If it's ...

...protection light illuminates Hi the protection light comes on when there is a problem within the amps. circuitry. Generally speaking the protection light normally comes on when powered up while the ...

...light amp is bad and if you have no protect light continue to hook up each speaker one by one while amp is on till you get a protection light and that speaker would be the source of your ...

...protection light on. audiobahn a2002t Either blown subs, or bad amp.. Disconnect the subs, and try turning the amp on, if the amp is still in protect then your amp is bad, if the protect light goes ...

protection light on i have a ts 1440 power acoustik amp and the protection light is on. and i already have an amp in my car and i used the power and ground from that. and the amp that im trying to ...

...protection light stay's on!! well the amp turn's on with da protection light staying on! Disconnect all speaker wires from the speaker terminals of the amp and disconnect signal cables from the amp. ...

...protection light! i had a problem with my sub so i just disconected sub from my amp and after that the amp were working fine and now when i want to conect my sub back to amp i noticed that the ...