Question about Breadman Kitchen Appliances - Others
pan is broken then you would have better luck trying to find the whole pan and not individual parts. Try ebay. Hank My pan jumps too!!! When I turn it on and it's kneading the dough, the pan jumps off
Question about Breadman Kitchen Appliances - Others
...broken or is loose. Make sure the pan is seated correctly will solve problem one. Take the pan and paddle out of the machine and see if turns freely by hand. If no, then the sealed bearing is broken ...
Question about Black & Decker Kitchen Appliances - Others
...pan is jammed or broken. Try filling it up with warm water and soaking it for a while. If it doesn't budge after a few tries then the bearing is broken and a new bread pan is needed. If on the other ...
Question about Betty Crocker Kitchen Appliances - Others
The kneader has come apart in the pan. The kneader falls off and the post it should be attached to comes out Hi, The sealed bearing in the pan is broken. You will need a new pan. Hank
Question about Oster Kitchen Appliances - Others
...after after about the 50th loaf. How can I fix this? Hi, If it's leaking from the bottom of the pan then the sealed bearing assembly is broken or defective. You will need a new bread pan. Sorry ...
Question about Oster Kitchen Appliances - Others
...broken and bread pan needs to be replaced. 2) Belt fell off or is snapped. Keep the pan out of the machine and go to a kneading cycle. Look through the window on the lid and see if the motor shaft is ...
Question about Panasonic Kitchen Appliances - Others
...is frozen. You can try putting warm water in the pan and soaking it. After a few tries if it does not free up then the sealed bearing is broken and bread pan needs to be replaced. Good ...
Question about Kitchen Appliances - Others
pan is broken. There is no fix for it...sorry. If under warranty sunbeam will replace it. Try looking on eBay for a new pan. ( I have same model as you and the bearing froze after 5 years of heavy use
Question about Kitchen Appliances - Others
...the machine at the kneading cycle and see if the motor spindle spins. If it doesn't you may need a new drive belt. Finally, if the pan is good, and the belt is good, then the motor may be broken. ...
Question about Welbilt Kitchen Appliances - Others
...is broken requiring a new pan. 2) Keep the pan out and start a kneading cycle. Look trough the window on the lid. If the motor shaft does not turn then the belt fell off or has snapped. Good ...
86 questions posted
Usually answered in minutes!
238 Questions
110 Questions
57 Questions
56 Questions
40 Questions