Dual XDVD8181 Car Video Player "dash dvd blue screen" Questions

...dash doesnt want to play dvds its displays a blue screen saying something about the breaks yes its saying in toorder to play dvd's u must engage parking brake which means the wire is suppose to be ...

...Dash DVD player I have a Jensen VM9311TS In-dash DVD player. I was wondering if there was a code that can be put in, like the e-brake override code. There is no e-brake override code. You have to ...

...dvd does play though just no volume Are you running the audio through an amplifier?  If so, it sounds like you are using the blue wire (power antenna remote turn on) instead of the blue/white ...

...dash from blue to red? I don't think you can - it's likely that it's an LCD-type screen illumination, not bulbs that can be changed. I haven't yet heard of anyone able to do this. I wish it was ...

...Dvd player and a new AMP but still have the same problem. PLEASE HELP. I have tried everything! Most likely its the ignition wire.. That 12 volt line let's it know when the switch is turned.. If the ...

dash dvd player it is d7905bd I am getting no sound and it has a blue screen and the little screen says back c 4 r any solutions if you connect the brown safety ground wire to the black ground wire it

...Dash Board. 3 3rd Connect one end to the emergency brake wire from the radio and then connect the other wire from the switch to a ground to your car. You can use the same ground connection that you ...

...dash dvd player/ receiver with i can't watch the dvd player because the reverse cord is not plugged in i have an older model vehicle and it does not have power to the emergancy brake is there a code ...

dvd player to one of the prongs on the switch. Now find a good solid metal ground under the dash, (mounting brace,etc.). Run a wire from this ground to the other prong on the switch. Now reinstall the

...blue screen to turn off. I pushed the stop butto twice entered the 1264 code, I moved the Joystick down two times and pushed in once, and I hit the sys setup button twice. That did not work. I ...