Brother XL-2600I "bobbin sounds loose" Questions

...bobbin sounds as if it has insufficient top tension, clean between discs then re thread with presser foot down If it is looping around the bobbin shuttle then it would be your top thread tension is ...

...bobbin case sounds loose and the thread jams with the fabric and everything gets stuck. That use to concern me too! I thought it signalled a problem, but my bobbin case has always been loose and that ...

...loose inside the bobbin case. If that dosen't work, try: 4. Wind a new bobbin (Sometimes a bobbin might wind thread to lose) Do not wind thread to the edge of bobbin. If that dosen't work, you should ...

...out all the thread. I am trying to cover piping for a dining room chair reupholstering task. Sounds like the bobbin is spinning to fast or is winded to loose. Try adjusting the tension on the

...loose and loopy. Is the bobbin tension the problem?? Please help! check both upper & lower tensions also check your needle to see if it's bent-roll on a flat surface to see if it rolls correctly ...

...on the bottom the problem is on the top.. If it loops on the top, the problem is on the bottom. Sounds like #1 your bobbin is wound very loosely , #2 your bobbin thread has to go thru its

...what to do next? Sounds like the machine needs retiming and the bottom gear checked undewr the bobbin case area, I can attach timing instructions if you email me ...

...of stitches and then back to normal. Bobbin thread loose. sounds like ur bobbin needs to be tighten, when loose the bobbon does not stop and you get more thred then needed hope this helps...

...tension on my Bro. cs6000i is too loose. The bobbin thread is showing on the top, and the bobbin side of the fabric is very loose Sound like your top thread tension is loose try increase the

...keeps knotting on the bottom. the top thread is fine and the bobbin was wound and place in the bobbins spot correctly. Help me! sounds like the bobbin tension is too loose. Try tightening it up a ...