Question about Fisher and Paykel Washing Machines
...water into the machine. Try replacing hot & cold water hoses. At the bottom of the machine, there is a filter, you must rotate it and pull out. You might find lots of dirt that doesn't let the ...
...washing. How can I remove this stuff? Hi all of them does it that is the staysoft having a reaction.only thing to do is to full it with water and remove the drian plug at bottom of machine to remove ...
...machine several times with soda crystals but it has not helped. A lot of the black stuff seems to be coming out with the water, as well as getting trapped in the rim of the door from which it doesn't ...
...washing machine My washer continue to omit black stuff. Washer is 4 years old. how can I get rid of it? All front loaders use very little water, they are required a cleaner to be run for a cycle some ...
Question about LG Washing Machines
...normal wash cycle, especially if you don't wash with hot water. LG recommends that the machine is cleaned in the above way once "fluff" or black residue is starting to show in clothes after
Question about Samsung Washing Machines
...washing machine top loader. We did a self-clean cycle. Black flakes was left at the end of the cycle. After, i did a few bleach and clr self-clean cycle. The blacks flakes still appears. I opened it ...
...failed usually confirmed as a rumbling noise when drum is spun by hand the black stuff is grease and wash water leaking from the bearings due to the failure of the water seal in front of the ...
...washing maching was pumping water into the tub, the tub would fill with water, which would rise a level higher than the washing machine waste hose. What this appeared to do was cause the machine not ...
...water in the machine has soaked up in the cloths--is this enough?. Also, I have had my dark cloths (like black) leave spots on the gray cloths. (Yes, I know to wash dark cloths with darks and whites ...
Question about Speed Queen Washing Machines
...water supply.Can this be coming from the bottom bearing of the drum? Remove FILL hose and try scraping out inside with a screwdriver. If you get the black stuff- fit new hoses. Or , remove drum and ...
937 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
476 Questions