Question about Washing Machines
...with 1 min to go. After switching off, the machine still says 1 min left regardless where I turn the dial check for the water vapor in the rotor switch, may caused corrosion causing this to
...1 min for 20 min on a normal cycle with a medium load itnstead of 40 min it takes about 75min. It just site on 1 min left for like 20 min while it does another rinse and spin Hi, This may happen if ...
...1 min remaining. Occationally it will complete the cycle and beep but the clothes will still be soaking wet. The times I have caught it in the act, it is after the pump runs to drain the water, the ...
its programs, they all stay on 1 min remaining then they never finish Pressure switch telling the controller there's still water in the machine. Remove tube from switch and blow down to unblock it
...1 min left?). I you run a program to empty the machine and or centrifuge it works fine! No problem with the pump! Any ideas? check your pump is not worn (how old is it) or check your ...
...1 min remaining and it coud be another 5-10 min. Now it is not spinning out properly and will continue to lock and unlock the door while in a wash/rinse cycle and even goes into a pause mode and you ...
...min remaining. It will not go past this point. The stop/pause button does no do anything. It sounds like the timer from my research, where can I get the timer at? I was shocked when i saw how easy ...
...cycle we have replaced the motor ( renew one) and the problem remain We have AEG lavamat 60210 front load washer and we get E60 code after 1 min. of washing. What is the problem with the
937 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
476 Questions
