Whirlpool GHW9400SU Front Load Stacked Washer / Dryer "spin lock flashing" Questions

...whilst this is running, and still it doen't go to full spin. The timer light and door lock light flashes..... my indesit washer/dryer wd12x programme dial goes all the way when it reaches ...

...the washer cycle stops, constant flashing of the sensing light. Lid ock will sometimes flash and lock and unlock a couple of times. No water will fill. No agitation or spin. Drain pump will

...spin because the lid lock light flashes, but does not turn solid red, as in the wash cycle Lift lid, stick screwdriver into slot where lid latch-pin inserts and see if it goes into the cycle. If so, ...

spin. Look for a broken lid lock - either the lock assembly or the small latch finger that inserts into the lock. With no model number there is no way to be more precise. Sears Kenmore is sourced from

...lock light is flashing and start and spin lights both flashing. Have tried pushing sta Whirlpool Cabrio toploading washer, lid is locked and won't open. Time remaining is flashing 1 minute. ...

spin out it does continue the final cycles with the light flashing but still will not spin out Sounds like the door lock sensor is malfunctioning. This definitely needs to be checked by a service tech

lock When the wash cycle reaches the spin icon it wont go any further. All the icons begin to flash and the door remains locked. The only way i can unlock it is select a cycle that has no spin so when

...spin, went through the dianostic test and it would spin. jumped out both contacts on door switch, still will only spin slowly a couple of revs and then flash door lock. Bad control board? bad door ...

...spin cycle. Lid lock flashes and nothing else happens push power to cancel spin light goes off lid lock blinks and per button doesn't work at all Check the switch that detects the lid is closed and ...