Boss PSA-120 (761294015735) Power Supply "unit" Questions

how to charge • IMPORTANT: This unit is delivered partially charged. Plug into an extension cord FOR 40 hours before using. You cannot overcharge the unit using the AC charging method. • To recharge ...

unit will not turn on The unit will not turn on even though I replaced the power supply I realized your problem. i think the problem is the main board of your unit. pls spicify the model and brnd. on ...

1.output supply is low 2.C11 needs to be changed regularly. 3. U2 is found blown 1.output supply is low I have found output voltage is 5.0 volts, 6.4 volts,8.8 volts, 10 volts in different units. ...

boss cs-3 compressor/sustanier when using 9vdc battery,the unit works just fine, but when i plug in the psa120 boss power supply, the red power on light goes dim.. and the sound from the unit is weak ...

Power Supply Unit our Power Supply unit damaged because of got over voltage, what I should do first. Is there any repair center for this power Supply Unit in Jakarta , Indonesia Hi harry_p58, It's not

...analog or digital - any one at your disposal can do ok. if all work well, then the power supply unit should be removed from the system unit, connected directly with the power cord and then

protection light flashing and alarm sounding, unit was running and the unit just quit and the flashing light and alarm came on it was hooked to a cb radio and i was talking on the radio and when i ...

...power defect I'm not familiar with the HP Provilliaon XP mother board and after moving the unit it didn't power up. found the P-8 wire plug detached. Need mother board connector pin-outs to ...

Dell Optiplex G110 power supply unit replacement Dell Optiplex G110 Power supply unit (NPS-110AB Rev:02, P/N 0001728P) having 110VAC input was unserviceable. The service personnel checked the unit ...

...jumpstart/compressor how do you charge the jumper box for use? i have the outlet plug, does the unit need to be on or off while plugged in? have charged it for few hours, when unplugged nothing ...