Dyson DC17 Animal Bagless Upright Cyclonic Vacuum "keeps going" Questions

keeps jammimg due to shedding new carpet. It jambs just as the carpet & dirt is going into the waste container. What can I do? I keep removing the stuck fiber with a wet vac and my fingers, and it

keeps going I have the Roomba Scheduler. It just keeps going around in a circle. I have changed the brushes and cleaned the cliff sensors, but it continues to go in circle. Anyone know what else to do

The belt of my dirt devil featherlite bagless keeps coming off lite bagless vacuum keeps slipping off the roller. I've replaced it three times and the second I go to use it on the carpet, it it it The

...vacuum keeps breaking belts Breaking belts is usually caused by the motor keeps going and the roller gets stalled or locks up. make sure you can spin the roller freely by hand befor replacing the ...

Keeps asking to be cleaned Our irobot keeps asking to be cleaned and will not go to work mode Regards George Since you do not say so, I assume that you have NOT cleaned all the locations recommended ...

the hose has a hole in it at the base of the steam vac..... can it still be used untill I can fix it A cheap fix for this is go to your home improvement center and get some rubber tape and put a ...

...keeps falling out and it is really difficult to pull the safety slide back and pull up on the orange trigger to keep it going. I see another lever that is orange behind the "trigger" that I ...

...going but it keeps cutting off if I WIGGLE THE WIRE and put the handle upright it starts again Cable has broken internally, wiggling is temporarily making contact which is why it then works. Get it ...

We have a Henry hvr200 keeps turning off We have a Henry hvr200 after hoovering for about 5 minutes it turns itself off. A couple of minutes later it turns itself back on. Keeps happening could be ...

...keeps going back in when pulling the cord out, it should 'keep' it that spot if you pull a certain direction, cant recall if it is up, or down, left or right, and pulling it opposite direction ...