Dyson DC17 Animal Bagless Upright Cyclonic Vacuum "hose losing suction" Questions

Hose suction Eureka theboss smartvac Good suction in upright mode, but when I switch to hose, I lose suction. No visible hose clog. There has to be a clog in the hose, Unhook the hose and drop like a ...

losing suction in upright position, but still picks up well with the hose attachment. It's probably your belt. It could be broken or stretched. If broken or stretched, the roller won't spin very well,

...losing suction My Bissell Lift off Revolution vacuum, pet brush suction very low. Was working fine last time I used it. Have had it for about 8 months with no probs. Clean filters every (or sometimes ...

losing suction filter clean,hoses clear,output blower good,but very poor suction if the blower is much stronger than the suction, you may have an air leakwhere the cover fits on tank or possibly a ...

hose has good suction but zero suction at the bottom. Clean filter,no clogs.i know replacing the broken belt will make the brush turn. Will it enable suction also? Clear the blockage and make sure the

...for suction at the lower intake. If you have suction, install the tank and remove hose, and check for suction there. keep following until youn lose it. Then you problem will be between those 2 ...

...suction isn't working. It is there, but wehn you put it together it won't vacum. Check hose to see if it is clogged. ALSO MAKE SURE ALL THE COMPARTMENTS ARE PUT BACK CORRECTLY.If the water resevoir ...

...areas of suction loss are within the hose itself, the vacuum bag, clogged rollers, broken vacuum belt or a faulty gasket. All of these problems will lead directly to the vacuum cleaner losing

...suction stays on the whole time (but then it's not lined up), I've never thought it worked well. (I've been in the house for 5 years and the unit is about 10 years old) I don't want to pay a repair ...

lose suction why do i lose suction when the dyson is standing up but the hose still works fine? Perhaps a clog in the lower unit?