...change the belt? I am not familiar with this model but the first step would be to remove the brush bar cover...this may be attached by screws or numbered tabs which are released in sequence ...
change belt model vrs25 r Your model # gives no indication of what kind of vacuum you have. I will treat it as an upright, most of which are basically the same when it comes to belts. Remove the brush
...isn't able to be taken apart and sounds like it may well have slipped off due to tension. how do I get to the top belt spindle on a DC O7 animal (purple one) to be able to change the brush ...
...change it. ( on average belts need to be changed every 6-8 months). the reason is that the belt streches over time and doesn't have enough tention to ingage the v-belt in order for the brush to work. ...
...Brush bar is clear and filters are clean. Seems like there's slipping somewhere. The belt is stretch and so it is slipping on the motor shaft. You need to change the belt. Here is a link for the ...
change the belt the front brushes do not turn Hi there, it's Jack at Dyson. DC25 doesn't have a traditional, user-replaceable belt. Instead, the belt is engineered to last the lifetime of the machine ...
...change-the-belt1/belt-fitting-preparation However, if you have a DC07 with the brush control feature, the clutch mechanism uses belts engineered to last the lifetime of the machine in normal use. ...
...brush and no change. I can not even figure out how to look and see if the belt is still attached. Suggestions? DC07s are not easy to check the belt on, in fact depending on which exact model you have ...
brush bar are not clogged with dirt - one way to check would be to check the brush bar rolls freely with no belt on it before putting a new one on. Another issue is something my old LG upright used to
1,106 questions posted
Usually answered in minutes!
1,132 Questions
870 Questions
655 Questions
597 Questions
450 Questions
