Question about Bissell Vacuums
...loud noise when brush roller is turned on dirt is being picked up ok, but a loud noise is heard when the brush roller is turned on. It sounds like the brush is hitting something Inspect the area ...
Question about Vacuums
...then. Replaced belt. Still so loud it hurts my ears! Clean filters, new belt, bin is empty Could be the brush roll, remove brush roll and see if noise is still there when brush roll motor is
...brush spin on the floor? Loud noises are usually caused by worn belts, unbalanced roller brush or debris in the roller brush. Check these things. Here is a link to the belt you need: Dyson DC17 ...
...brush roller loud noise when pulling the unit backwards from the brush roller area Hi its Darran at Dyson. Maybe worth checking the brush bar and cleanerhead for a blockage or for any damage. If you ...
loud noises and turned over the vacuum and where the brush is, traps hair, thread, rubber bands, etc. Just take a scissor and cut it all out. Don't cut the bristles. Roll the brush as you cut and pull
...LOUD click/catching noise only when the cleaner is in user position for floor/carpet cleaning - when the cleaner head is down and the handle sloping. The noise appears to be comming from the area of ...
...brush bar being cracked that's causing the loud noise? The noise is likely the clutch if you have a cracked brush bar. If so replace the brush bar, also replace the belts in the clutch or the clutch ...
Question about Hoover Vacuums
...spray a bit of WD40- if you do that wipe well before you vacuum. Finally....if the vacuum was still loud with the brush bar off...you have a motor problem and that could be expensive. ...
...pressed reset button, brush not turning before, works now but making loud noise Make sure bearings spin freely. If brush roll is not cleaned frequently enough hair can damage bearings or end caps. ...
Question about Eureka Vacuums
...brush turning? Very loud noise sounds like maybe it's coming from the brush turning? sounds like the bearings at end of brushbar need ...
1,106 questions posted
Usually answered in minutes!
1,132 Questions
870 Questions
655 Questions
597 Questions
450 Questions