Alpine CDA-9885 CD Player "sound error" Questions

error is most likely caused by a shorted or grounded speaker wire. Check all speaker wires, correct the problem, and then go into the sound setup settings and reset the POWER IC to ON. Hope this helps

error 3 sometimes shows up. Other times the cd will play but there will be a rythmic scratching sound louder than the music itself. Almost like every time the cd goes around it makes a scraping sound.

...sound - error message AMP_GRD No sound comes out - Just the error AMP_GRD on the display comes up when i try to adjust the volume.... Got any ideas? Thanks, Charisse Charisse, Check your speaker ...

what does error code r3 mean? It sounds like an installation error. One of the cords is installed incorrectly.

...ERROR. scrolls across display and there is no sound. The tuner and cd player work fine. Any idea what the problem would be? Use a multimeter to check for connectivity to the sirius. Where did you ...

...deh-x36ui Hello there. I didn't see this post with 'Amp error' before I answered the other one. Sounds almost Definitely your speakers cant take the power. They need to be capable of AT LEAST 50 ...

...and AUX work, but the cd function does nothing no matter what format disc i put in. hi TOC error sounds like its the laser is faulty. you could try a cd cleaning disc. this may cure the problem.. ...

...load then it just flashes "ERROR", ive tried putting a cleaning CD in and it still does it.help! it sounds like it is the laser is gone bad or need a good cleaning if you smoke the ashes can get in ...

error I have a pioneer deh-1650 and when i am driving it will stop playing and ERROR-AO pops up. sounds like slight vibrations from road are loosening a wire connection. re-check all wire connections

error" message display on my Pioneer DEH-15UB and it quit playing. No sound at all. It happened while I was driving my Jeep. When I got home I removed the passenger side speaker from the sound bar and