Directv (DWO2-10024) "strength" Questions

...switching it offf and on again and wiggling all the cables.. Seems to be the unit. What about the strength of the signal? If it is very weak, this could happen. Check the signal strength first. ...

have low cnr (42)signal strength 124 how do i fix the cnr strength????? check coax cable

...it works fine, but TV1 will say aquiring satellite signal. Both satellites 119 and 110 lock in with strength over 80. I tried moving the dish to a new location and replaced the LNB, no luck. Any ...

...break up looking for satellite You may need to re aim your dish because you are having a low signal strength issue. Check for new tree growth in the line of site. If that won't help you can replace ...

RCA DRD485RG Direct TV I lost some of the channels on my DRD 485 RG. Signal strength is 97% switched my two receivers and its not the dish or cables. It takes quite a while for the data acquisition to

...HD tuner built in to the connection and that works fine. Brian Pixelation is caused by poor signal strength. Check the signal strength in the setup section. Unfortunately some boxes and TVs don't ...

I tried resetting to default settings but still no joy. When I checked signal status it says signal strength 29, quality 0. sig strength 29 is too low to lock onto. Humax needs 50+ to lock ideally 65+

...and all color calibrations failed. The tech said that he was only responsible for ensuring signal strength was at a given range. When he first tested signal it was down in the 70 percent signal ...

Onn freeview box - no ch12, and multicopies of 2 progs recorded Onn freeview box - 1. Doesn't appear to have channel 12(yesterday). 2.It appeared to have 20 copies of 2 programmes recorded. Had to ...

retune it. First check the aerial's cable coaxial(coax) plug/s is/are ok. Poor signal strength can cause this problem - all bad coax connections drop signal strength