...test the mulltitester in a speaker HelloThere are mainly two type of multimeters. The first type is analogue one, which will have a needle deflects inside its dial to show measurements, and the ...
Question about Technics Audio Players & Recorders
...test both the speakers. If ok connect and switch on. try to hear if the relay is clicking or if you hear any noise. If not disconnect, open the set and use a multimeter to check if the output had ...
...test your speaker, you will need a multimeter. Set it to ohms resistance and touch the speaker terminals, if there is a short internally the meter will read "1......" If it's an analog meter, it will ...
...speakers is ok, checked through Bside. This explains that your output of the side A is not working and it is possible that the output driver would have failed. First of all open the set and check on ...
...using a 3-prong power cord to a new Furman power conditioner. Connect a pair of speakers. Nothing connected to input jacks yet. 3. Power On: I get silence. Yay. 4. Connect a pair of patch cords high ...
Question about Creek Audio Players & Recorders
...test. If you find the culprit unit you will find it has a DC voltage on its output on switch on, which dies away slowly. Touching the metal case is a way of discharging this voltage build up, and you ...
11 questions posted
Usually answered in minutes!
192 Questions
173 Questions
140 Questions
146 Questions
92 Questions